I've been using the Hioki dc clamp meter just fine on 1500vdc circuits. I only use it for DC, and it works fine.
Roy Rakobitsch Wind/PV Design Engineer Windsine LLC 631-514-4166 www.windsine.org On Mon, Oct 26, 2020, 14:22 Evan M <emerke...@gmail.com> wrote: > hey all, > anyone have any good recommendations on clamp meters rated up to or over > 1500Vdc? I had my eye on the Hioki unit but their fine print says you can > only go over 1000V if the circuit is isolated from the grid and isolated > from ground. Isolated from grid means I can't take operating voltage > readings under load (at least not with a transformerless inverter) and > isolated from ground means I can't use it with a larger transformer-based > inverter. anyone found a better unit out there without the fine print? > > thanks! > evan > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
