We have a drawer full of labels and placards from PV-Labels. If we need
smaller "fine-tuned" labels quickly, occasionally we'll use the Brady
BMP21 Plus (3/4" vinyl cartridge) if its not going to see much sun. The
label makers you may be referring to cost $700 to $4K! so we've opted to
stock PV-labels. PV-labels makes a zillion different labels and will
custom make and ship same day labels of your request, placards too
usually next day.
Bill
Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net
On 10/10/2020 6:35 PM, Evan M wrote:
Hey Wrenches,
Anyone had any luck with one of those DIY label maker machines you can
bring to the site? I'm skeptical of most of them for fear that the
quality of the label isn't up to constant sun exposure, rain, weather,
etc. Would be a nice to have for the non-standard labels that are
different from project to project.
Thx,
Evan
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
--
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
