On the past I've had plan reviewers object to any hole or lag into rafters, especially trusses, claiming it voided warranty...any thoughts? Ken Schaal
On Tue, Aug 4, 2020, 5:45 PM Jeremy Coxon <[email protected]> wrote: > We have tried all manner of gadgets over the years and haven’t found > anything more accurate than a hammer and a tuned (experienced) ear. Gentle > taps (so as to not damage roof) are all that’s needed. We also have a 12” > piece of solid #10 copper in each tool belt for those tricky roofs where > rafter spacing isn’t consistent or there are sistered rafters for long > spans. Insert the wire thru a test hole, bend into a U shape, then rotate > to find exact location of rafter, mark with chalk, then go to town. > > Jeremy Coxon NABCEP > Certified MWBE > > Sent from my iPhone > > > On Aug 4, 2020, at 5:34 PM, [email protected] > wrote: > > > > Re: Flir One for Smart Phones (Jason Szumlanski) > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
