For rolling thru a building, I bought a “safe mover”: $569 https://www.northerntool.com/shop/tools/product_200673748_200673748
It has 2 end sets of turnable poly-urethane wheels, hydraulic jacks on both ends, & ratchet straps that connect one end with the other end. Rated at 3000#. Great for moving almost everything. You do have 4 point loads so if you are rolling over tile or stone floors I suggest laying down ¾: ply for dispersing the weight a bit. For getting down the road: $ cost custom built trailer… For narrow mountain roads & tight switchbacks - I built a narrow 3 ton trailer with an overhead Gannon I-Beam for a roller, & use a 2 ton chain fall to lift and roll the batteries off. The trailer has crank down jacks on each corner to stabilize the lift & transport while unloading. It will hold 4 of the smaller HUP Batteries & only 2 of the 2490 AHR/12 VDC cans. If anyone want pics let me know & I can either post or email direct. Dana Orzel Great Solar Works, Inc. C - 208.721.7003 d...@solarwork.com Idaho Contractor - # 028765 Idaho PV # 028374 NABCEP # 051112-136 <http://www.solarwork.com/> www.solarwork.com "Responsible Technologies for Responsible People since 1988" P Please consider the environment before printing this email. From: RE-wrenches <re-wrenches-boun...@lists.re-wrenches.org> On Behalf Of Jason Szumlanski Sent: Thursday, July 23, 2020 4:22 PM To: RE-wrenches <re-wrenches@lists.re-wrenches.org> Subject: Re: [RE-wrenches] Two Dilemmas Chain hoist and muscle for the move. It's not easy. It can be hard to get them out of the steel case. Slow and careful... I haven't done this a lot, but the few times it was a dicey proposition. Jason Szumlanski On Thu, Jul 23, 2020 at 5:47 PM Rick Brown <r...@solshineenergyalternatives.com <mailto:r...@solshineenergyalternatives.com> > wrote: Wrenches, Dilemma #1: I’ve had to replace 4 sets of Solar One batteries (see pic). Each set weighs in excess of 1000lbs. How have you all transported these? The originals were placed into service prior to the room’s walls and roof going up. Dilemma #2: The above system is comprised of a Trace SW5548 along with two Outback FM60s. After reprogramming the CCs and inverter with new charging parameters, I can’t get the Trace to export excess production once the batteries are charged. I do have the inverter set to “Sell” mode What am I missing? I have had little experience with the Trace line. Thanks, rick brown SolShine Energy Alternatives, LLC Electrical & Solar Contracting Services www.SolShineEnergyAlternatives.com <https://mailtrack.io/trace/link/cd6490343ec8bea89108ca98f415d0f333006459?url=http%3A%2F%2Fwww.SolShineEnergyAlternatives.com&userId=1613865&signature=0f9b54a9d3333480> Check, Virginia 24072 540.808.9502 <tel:540.808.9502> VA Class A Contractor Lic# 2705147660 VA Master Electrician Lic# 2710062762 VA Alternative Energy Systems Installer NABCEP Certified PV Installation Professional 110112-21 _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org <mailto:RE-wrenches@lists.re-wrenches.org> Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org <https://mailtrack.io/trace/link/8283b3c2eae7cf88321c40aa81d0e77530c50622?url=http%3A%2F%2Flists.re-wrenches.org%2Foptions.cgi%2Fre-wrenches-re-wrenches.org&userId=1613865&signature=8bc93512b53de863> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org <https://mailtrack.io/trace/link/c98f0893a03c9b7b149fb7449d75db66d820f42b?url=http%3A%2F%2Flists.re-wrenches.org%2Fpipermail%2Fre-wrenches-re-wrenches.org&userId=1613865&signature=8bad164b4080c809> List rules & etiquette: www.re-wrenches.org/etiquette.htm <https://mailtrack.io/trace/link/49811a402fb2d33d4c6705a3e43f1a76d4c89e54?url=http%3A%2F%2Fwww.re-wrenches.org%2Fetiquette.htm&userId=1613865&signature=47b77b3e44bfd621> Check out or update participant bios: www.members.re-wrenches.org <https://mailtrack.io/trace/link/926642e33c982c7ad3b3048307cc82c2592f8469?url=http%3A%2F%2Fwww.members.re-wrenches.org&userId=1613865&signature=12b81d92c48f4367>
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
