I can get you Jeff at Watsons' number but I was told 10 years ago there
is nothing left for that unit. You are going to have to fabricate or
modify. The linear motor has had 3 later changes and maybe you could get
one to work. If it is the electronics, you are done as that would be
component level troubleshooting. That is long gone unless you have the
knack? 

Probably best to just set it fixed and add more solar. The manual
you got for the az 125 is also not made anymore but the motor is the same
as the az 250 (8" pole) and the electronics can be updated to the new
controller.  

Dave Angelini Offgrid Solar
"we go where powerlines
don't"
http://members.sti.net/offgridsolar/ [1]
e-mail offgridso...@sti.net
[2]
text 209 813 0060

On Tue, 21 Jul 2020 22:04:46 -0700, William Miller 
wrote:   

Dave/Wrenches: 

Thanks to Allan for sending me the manual for
an AZ125. It is not that model. I will file the manual for the AZ15 anyway
as that was missing from my library and there are two of those on this
project as well. 

I apologize if the photo was not great. I can never
remember the file size limitations. Attached is maybe a better photo. Hope
it goes through.  

This is a single axis tracker without a manual seasonal
tilt adjustment. The fixed axis is kind of a square yoke assembly. The
fixed axis is level. So I guess this means either this unit is meant for
equatorial installation-- or the tracking motion is for tilt tracking only.
The control is in two boxes: one with the shade pole and one with the
electronics, but no external switches. I've had some long days in the heat
lately so maybe I am missing some information needed here. 

I called the
number on the Wattsun website and left a message. Is there a preferred
contact anyone out there knows? 

Thanks to everyone for trying to help
out. When you are alone and stuck the Wrenches is a tremendous resource.


William 

-----Original Message-----
From: RE-wrenches
[mailto:re-wrenches-boun...@lists.re-wrenches.org [3]] On Behalf Of Dave
Angelini Offgrid Solar
Sent: Tuesday, July 21, 2020 7:38 PM
To:
RE-wrenches
Subject: Re: [RE-wrenches] Tracker manual needed 

Not enough
resolution to id. Best guess is pre AZ125 which is long gone. 

Ask Jeff at
Wattsun! --Dave 

Dave Angelini Offgrid Solar 

"we go where powerlines
don't" 

http://members.sti.net/offgridsolar/ [4] 

e-mail
offgridso...@sti.net [5] 

text 209 813 0060 

On Tue, 21 Jul 2020 14:46:57
-0700, William Miller 

 wrote: 

> Friends: 

> 

> If anyone has a manual
for this tracker, I would really be grateful to 

> receive it. Pretty sure
it's some form of Wattsun tracker. 

> 

> TIA


_______________________________________________ 

List sponsored by
Redwood Alliance 

List Address: RE-wrenches@lists.re-wrenches.org [7]


Change listserver email address & settings:


http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [8]


List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org [9]


List rules & etiquette: 

www.re-wrenches.org/etiquette.htm [10] 

Check
out or update participant bios: 

www.members.re-wrenches.org [11] 

  


Links:
------
[1] http://members.sti.net/offgridsolar/
[2]
mailto:offgridso...@sti.net
[3]
mailto:re-wrenches-boun...@lists.re-wrenches.org
[4]
http://members.sti.net/offgridsolar/
[5] mailto:offgridso...@sti.net
[6]
mailto:will...@millersolar.com
[7]
mailto:RE-wrenches@lists.re-wrenches.org
[8]
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
[9]
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
[10]
http://www.re-wrenches.org/etiquette.htm
[11]
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to