Dave, Yes, they are interchangable and using it will make the inverter an off grid version. I have done that to several grid tie versions as I do mostly off grid work. Yes, the AC Bd and the FET board and transformer are all the same.. The GVFX control board is for grid tie and usually does not allow a generator to feed in as the GVFX version sells to the grid and has stricter voltage and frequency limits. Sometimes a generator can feed but selling has to be disabled and I have had it work only once. Have tried to get my honda 2000 to charge again with a gvfx but no luck.
John Blittersdorf CV Wind On Fri, May 29, 2020 at 3:51 PM Dave Angelini Offgrid Solar < offgridso...@sti.net> wrote: > Outback Gurus, > > I got this text from a friend. I do not know the years on any of this. > > The control board on a gvfx 3648 went out on me and a friend has a spare > vfx 3648 control board that I can borrow. Does anyone here have actual > experience with using a vfx control board in a gvfx inverter? A "guy" said > that the FET and AC boards are the same in the 2 inverters and he thought > it should work fine. I'm in Baja and there aren't too many options to > getting the correct part down here in a timely fashion. I'm offgrid and do > not have a grid option either. My generator is getting some overtime use > now. > Thx! FRIDAY ! > > > > *Dave Angelini Offgrid Solar > "we go where powerlines don't" > http://members.sti.net/offgridsolar/ <http://members.sti.net/offgridsolar/> > e-mail offgridso...@sti.net <offgridso...@sti.net> > text 209 813 0060* > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
