Goats are definitely off, I found they ate everything except what you wanted them to.  Very cute though.  The low profile "Robo mower" idea has merit.

The best I've seen was a wild flower seed mix, that all grew only a couple of feet high max.  They probably needed some weed wacking a few times a year, but much less than grass.  Totally depends on the location.  On the wet side of Maui, you would have the array disappear into the jungle in 6 months, never to be seen again.  In the desert, it might be sage brush after 10 years.

I worked on a project once that used 4" deep gravel spread over 160 acres.  Total disaster in my opinion; think how many cubic yards had to be trucked in.  Vehicles got stuck in the loose gravel, it slowed everyone down, and 3 ft high weeds were growing up out of it in 6 weeks.  Then when you went to weed wack, you had gravel projectiles sent flying into the glass.


Ray Walters
Remote Solar
303 505-8760

On 5/13/20 9:28 PM, Jay wrote:
Have you thought of sheep?

Goats can be tough as they like to eat wire and climb on the panels. But if the 
modules are off the ground high enough might work.

Jay

Peltz power.


On May 13, 2020, at 6:22 PM, Corey Shalanski <coreso...@gmail.com> wrote:


This is not so much a "wrench" question--more like a "lawnmower" question...

For anyone involved with large-scale ground mount systems, I am curious about the 
various methods being used to control vegetation. My sense has been that O&M 
service providers generally gravitate toward gas mowers/trimmers with spot 
application of chemical herbicides. Does anyone have any experience with 
alternative methods, such as specialized seeding (e.g. pollinator-friendly), 
groundcover plants, goat herds, maybe even robotic GPS-guided mowers? I'm 
especially interested to hear from anyone who has analyzed the pros/cons of 
different methods or who can speak to any approaches that might be site-specific.

--
Corey Shalanski
Jah Light Solar
Portland, Jamaica
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to