Mac, This sounds more like an AGS issue that Xanbus, if it the only component affected. Please contact me directly and I can send you instructions.
Thanks From: RE-wrenches <re-wrenches-boun...@lists.re-wrenches.org> On Behalf Of Mac Lewis Sent: Friday, January 31, 2020 6:19 AM To: RE-wrenches <re-wrenches@lists.re-wrenches.org> Subject: [RE-wrenches] Troubleshooting Xanbus [External email: Use caution with links and attachments] ________________________________ Hi Wrenches, Does anyone have a good way to locate intermittent Xanbus issues with Schneider equipment? We have a site that has been giving us a lot of issues. It seems like the AGS might be dropping in and out and defaulting to "Off". It works flawlessly when we are there of course. Cables are testing fine. No other device seems to have these issues. All of these cables are factory made. Maybe there is another explanation for the AGS defaulting to "Off". Thanks in advance for your help -- Mac Lewis "Yo solo sé que no sé nada." -Sócrates ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. ______________________________________________________________________
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
