(my response to private email)
Magnums were designed for the RV industry which depends heavily on generator 
use for AC power. Because of that their allowable input is broad at 50 to 70 Hz 
and 60 to 140 VAC (120 VAC nominal). The customer must have a defective control 
board if it will not allow above 125 Vac. Control boards are not to pricy and 
very easy to replace. Hope that helps.


Larry Crutcher
Starlight Solar Power Systems




On Sep 24, 2019, at 9:39 AM, Starlight Solar Power Systems 
<la...@starlightsolar.com> wrote:

Hi Dave,

I’m curious, can you describe the problem you had with a Magnum inverter and 
the 2000i generator? Since Magnum was founded we have sold and installed their 
inverters to customers using the 2000i, many hundreds of customers. Not one has 
reported a problem. As long as you decrease the charge rate to about 50% or 
less, they work flawlessly. 

Larry Crutcher
Starlight Solar Power Systems






On Sep 24, 2019, at 8:30 AM, Dave Angelini Offgrid Solar <offgridso...@sti.net 
<mailto:offgridso...@sti.net>> wrote:

We ended up usine a 50 foot #14 extension cord and the drop got the 2000i to 
play nice with the magnum. Outback and Schneider have a much wider input range 
and this was an older Magnum.

Dave Angelini Offgrid Solar
"we go where powerlines don't"
http://members.sti.net/offgridsolar/ <http://members.sti.net/offgridsolar/>
e-mail  offgridso...@sti.net <mailto:offgridso...@sti.net>
text 209 813 0060


_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org


_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to