Maverick: I have a 15kW EcoGen. Please send the oil line correction. Thanks! Gary
> On Jul 27, 2019, at 10:57 PM, Maverick Brown <maver...@mavericksolar.com> > wrote: > > Mine died from brushes , I guess catching fire, and that was precipitated by > an oil leak on the upper oil hose. The crimp-on fitting was allowing oil to > bypass the clamp, spray on the engine and generator head. There is vent hole > right on the top of generator head in a perfect place below the oil tube/air > intake to breath in the oil and send it through the generator head. Just > lovely. > > If yours is still working, I’ll send you a photo and a note to make a > correction to the oil line. > > Thank you, > > Maverick > > >> On Jul 27, 2019, at 5:08 PM, Chris Mason <cometenergysyst...@gmail.com> >> wrote: >> >> When you say it died, what was the problem? >> >>> On Sat, Jul 27, 2019 at 5:43 PM Jason Jackson >>> <ja...@hakaienergysolutions.com> wrote: >>> Same experience here in Canada. We installed two Ecogens last year, against >>> our better judgement. Both were dead in under 12 months. One was rebuilt >>> under warranty and promptly died again, no coverage in that case. Another >>> was refused warranty as it has been used (sparingly) as prime power during >>> construction, prior to being connected to the inverter system. No warranty >>> if it's not connected to an inverter system on day 1! That model was >>> promptly pulled from the market according to our local ASC, and has been >>> replaced with something similar apparently. >>> >>> >>> Jason Jackson, Energy Systems Designer >>> Ph: 888 604 3128 xt. 101 >>> www.hakaienergy.ca >>> >>> >>>> On Sat, Jul 27, 2019 at 2:07 PM >>>> <re-wrenches-requ...@lists.re-wrenches.org> wrote: >>>> Send RE-wrenches mailing list submissions to >>>> re-wrenches@lists.re-wrenches.org >>>> >>>> To subscribe or unsubscribe via the World Wide Web, visit >>>> >>>> http://lists.re-wrenches.org/listinfo.cgi/re-wrenches-re-wrenches.org >>>> or, via email, send a message with subject or body 'help' to >>>> re-wrenches-requ...@lists.re-wrenches.org >>>> >>>> You can reach the person managing the list at >>>> re-wrenches-ow...@lists.re-wrenches.org >>>> >>>> When replying, please edit your Subject line so it is more specific >>>> than "Re: Contents of RE-wrenches digest..." >>>> When responding to posts within the Digest, be sure to restore the >>>> Subject: line to the original, and please edit out any extraneous lines >>>> from the quoted message. >>>> Today's Topics: >>>> >>>> 1. Re: Generac Warranty claim ECOGEN 15k (Dana) >>>> 2. solar inter row shading (jay) >>>> 3. Re: solar inter row shading (Chris Mason) >>>> 4. Re: solar inter row shading (Ray) >>>> 5. Re: solar inter row shading (William Miller) >>>> >>>> >>>> >>>> ---------- Forwarded message ---------- >>>> From: Dana <d...@solarwork.com> >>>> To: "'RE-wrenches'" <re-wrenches@lists.re-wrenches.org> >>>> Cc: >>>> Bcc: >>>> Date: Fri, 26 Jul 2019 15:42:35 -0600 >>>> Subject: Re: [RE-wrenches] Generac Warranty claim ECOGEN 15k >>>> Generwrecked strikes again! After 3 fires in the controllers & 2 more >>>> engine meltdowns due to oil loss I would not touch a wreck. >>>> >>>> >>>> >>>> Dana Orzel Great Solar Works, Inc. >>>> C - 208.721.7003 d...@solarwork.com >>>> Idaho Contractor - # 028765 Idaho PV # 028374 >>>> NABCEP # 051112-136 www.solarwork.com >>>> "Responsible Technologies for Responsible People since 1988" >>>> Please consider the environment before printing this email. >>>> >>>> >>>> -----Original Message----- >>>> From: RE-wrenches <re-wrenches-boun...@lists.re-wrenches.org> On Behalf Of >>>> Maverick Brown >>>> Sent: Friday, July 26, 2019 11:41 AM >>>> To: re-wrenches@lists.re-wrenches.org >>>> Subject: [RE-wrenches] Generac Warranty claim ECOGEN 15k >>>> >>>> Wrenches >>>> >>>> Any guidance on getting warranty claim approved when their denial reason >>>> is the generic “unsafe” installation? There isn’t anything unsafe about >>>> the 1.5 year install that I can see. The ECOGEN is connected to an Outback >>>> Radian. >>>> >>>> Generator has 950 hours on it before the brushes melted down from being >>>> exposed to engine oil. >>>> >>>> Thank you, >>>> >>>> Maverick >>>> >>>> >>>> _______________________________________________ >>>> List sponsored by Redwood Alliance >>>> >>>> List Address: RE-wrenches@lists.re-wrenches.org >>>> >>>> Change listserver email address & settings: >>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>>> >>>> List-Archive: >>>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >>>> >>>> List rules & etiquette: >>>> www.re-wrenches.org/etiquette.htm >>>> >>>> Check out or update participant bios: >>>> www.members.re-wrenches.org >>>> >>>> >>>> >>>> >>>> >>>> >>>> ---------- Forwarded message ---------- >>>> From: jay <jay.pe...@gmail.com> >>>> To: RE-wrenches <re-wrenches@lists.re-wrenches.org> >>>> Cc: >>>> Bcc: >>>> Date: Fri, 26 Jul 2019 14:59:06 -0700 >>>> Subject: [RE-wrenches] solar inter row shading >>>> HI All, >>>> >>>> I’m wondering if there is any programs/apps that do inter row shading? >>>> I can’t find any. >>>> >>>> RBI used to have one, it was really slick. >>>> >>>> Thanks >>>> >>>> jay >>>> >>>> peltz power >>>> >>>> >>>> >>>> >>>> >>>> >>>> ---------- Forwarded message ---------- >>>> From: Chris Mason <cometenergysyst...@gmail.com> >>>> To: RE-wrenches <re-wrenches@lists.re-wrenches.org> >>>> Cc: >>>> Bcc: >>>> Date: Fri, 26 Jul 2019 20:03:23 -0400 >>>> Subject: Re: [RE-wrenches] solar inter row shading >>>> Sketchup with Skelion >>>> >>>>> On Fri, Jul 26, 2019 at 6:41 PM jay <jay.pe...@gmail.com> wrote: >>>>> HI All, >>>>> >>>>> I’m wondering if there is any programs/apps that do inter row shading? >>>>> I can’t find any. >>>>> >>>>> RBI used to have one, it was really slick. >>>>> >>>>> Thanks >>>>> >>>>> jay >>>>> >>>>> peltz power >>>>> >>>>> >>>>> _______________________________________________ >>>>> List sponsored by Redwood Alliance >>>>> >>>>> List Address: RE-wrenches@lists.re-wrenches.org >>>>> >>>>> Change listserver email address & settings: >>>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>>>> >>>>> List-Archive: >>>>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >>>>> >>>>> List rules & etiquette: >>>>> www.re-wrenches.org/etiquette.htm >>>>> >>>>> Check out or update participant bios: >>>>> www.members.re-wrenches.org >>>>> >>>> >>>> >>>> -- >>>> Chris Mason >>>> Solar systems designer >>>> Generac Generators Industrial technician >>>> >>>> Comet Systems Ltd DBA Comet Solar >>>> Anguilla Cell 264.235.5670 >>>> WhatsApp 264.235.5670 >>>> Skype: netconcepts >>>> www.cometsolar.com >>>> >>>> >>>> >>>> ---------- Forwarded message ---------- >>>> From: Ray <r...@solarray.com> >>>> To: re-wrenches@lists.re-wrenches.org >>>> Cc: >>>> Bcc: >>>> Date: Fri, 26 Jul 2019 19:15:29 -0600 >>>> Subject: Re: [RE-wrenches] solar inter row shading >>>> Here's a cool row spacing sheet that the Wrenches' own William Miller >>>> provided us a few years back. He might have a newer version, but this >>>> should do what you need, I think. >>>> >>>> Ray Walters >>>> Remote Solar >>>> 303 505-8760 >>>>> On 7/26/19 6:03 PM, Chris Mason wrote: >>>>> Sketchup with Skelion >>>>> >>>>>> On Fri, Jul 26, 2019 at 6:41 PM jay <jay.pe...@gmail.com> wrote: >>>>>> HI All, >>>>>> >>>>>> I’m wondering if there is any programs/apps that do inter row shading? >>>>>> I can’t find any. >>>>>> >>>>>> RBI used to have one, it was really slick. >>>>>> >>>>>> Thanks >>>>>> >>>>>> jay >>>>>> >>>>>> peltz power >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> List sponsored by Redwood Alliance >>>>>> >>>>>> List Address: RE-wrenches@lists.re-wrenches.org >>>>>> >>>>>> Change listserver email address & settings: >>>>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>>>>> >>>>>> List-Archive: >>>>>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >>>>>> >>>>>> List rules & etiquette: >>>>>> www.re-wrenches.org/etiquette.htm >>>>>> >>>>>> Check out or update participant bios: >>>>>> www.members.re-wrenches.org >>>>>> >>>>> >>>>> >>>>> -- >>>>> Chris Mason >>>>> Solar systems designer >>>>> Generac Generators Industrial technician >>>>> >>>>> Comet Systems Ltd DBA Comet Solar >>>>> Anguilla Cell 264.235.5670 >>>>> WhatsApp 264.235.5670 >>>>> Skype: netconcepts >>>>> www.cometsolar.com >>>>> >>>>> >>>>> _______________________________________________ >>>>> List sponsored by Redwood Alliance >>>>> >>>>> List Address: RE-wrenches@lists.re-wrenches.org >>>>> >>>>> Change listserver email address & settings: >>>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>>>> >>>>> List-Archive: >>>>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >>>>> >>>>> List rules & etiquette: >>>>> www.re-wrenches.org/etiquette.htm >>>>> >>>>> Check out or update participant bios: >>>>> www.members.re-wrenches.org >>>>> >>>> >>>> >>>> >>>> ---------- Forwarded message ---------- >>>> From: William Miller <will...@millersolar.com> >>>> To: RE-wrenches <re-wrenches@lists.re-wrenches.org> >>>> Cc: >>>> Bcc: >>>> Date: Fri, 26 Jul 2019 15:48:14 -0700 >>>> Subject: Re: [RE-wrenches] solar inter row shading >>>> Jay: >>>> >>>> I have a spreadsheet on our website that might do the trick. It gets >>>> complicated with non-flat ground and rows that are not due east-west. It’s >>>> been a long time since I used it but give it a try. >>>> >>>> MillerSolar.com, find resources tab. >>>> >>>> William >>>> >>>> > On Jul 26, 2019, at 2:59 PM, jay <jay.pe...@gmail.com> wrote: >>>> > >>>> > HI All, >>>> > >>>> > I’m wondering if there is any programs/apps that do inter row shading? >>>> > I can’t find any. >>>> > >>>> > RBI used to have one, it was really slick. >>>> > >>>> > Thanks >>>> > >>>> > jay >>>> > >>>> > peltz power >>>> > >>>> > >>>> > _______________________________________________ >>>> > List sponsored by Redwood Alliance >>>> > >>>> > List Address: RE-wrenches@lists.re-wrenches.org >>>> > >>>> > Change listserver email address & settings: >>>> > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>>> > >>>> > List-Archive: >>>> > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >>>> > >>>> > List rules & etiquette: >>>> > www.re-wrenches.org/etiquette.htm >>>> > >>>> > Check out or update participant bios: >>>> > www.members.re-wrenches.org >>>> > >>>> >>>> _______________________________________________ >>>> List sponsored by Redwood Alliance >>>> >>>> List Address: RE-wrenches@lists.re-wrenches.org >>>> >>>> Change listserver email address & settings: >>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>>> >>>> List-Archive: >>>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >>>> >>>> List rules & etiquette: >>>> www.re-wrenches.org/etiquette.htm >>>> >>>> Check out or update participant bios: >>>> www.members.re-wrenches.org >>> _______________________________________________ >>> List sponsored by Redwood Alliance >>> >>> List Address: RE-wrenches@lists.re-wrenches.org >>> >>> Change listserver email address & settings: >>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>> >>> List-Archive: >>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >>> >>> List rules & etiquette: >>> www.re-wrenches.org/etiquette.htm >>> >>> Check out or update participant bios: >>> www.members.re-wrenches.org >>> >> >> >> -- >> Chris Mason >> Solar systems designer >> Generac Generators Industrial technician >> >> Comet Systems Ltd DBA Comet Solar >> Anguilla Cell 264.235.5670 >> WhatsApp 264.235.5670 >> Skype: netconcepts >> www.cometsolar.com >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> www.members.re-wrenches.org >> > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
