Jason, Can you share the Battery Daily Summary from the ComBox? Only select the battery voltage so it is easier to see where the 0.8V jump is occurring.
Also, what battery are you using? Thanks Sandra Herrera From: RE-wrenches <[email protected]> On Behalf Of Jason Szumlanski Sent: Monday, March 25, 2019 1:36 PM To: RE-wrenches <[email protected]> Subject: [RE-wrenches] Xantrex XW6048 (quad) blowing past setpoints [External email: Use caution with links and attachments] ________________________________ I have four inverter/chargers (master and 3 slaves) that are blowing past their 57.6V setpoint that I programmed and confirmed via the Context Combox. They are hitting 58.4V and tripping the battery management units on a set of Lithium Batts. Any ideas why this would happen? I can disable chargers on individual units, so I know the settings are getting uploaded via the Combox. Jason Szumlanski ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. ______________________________________________________________________
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
