Simplyphi does not have a built in method for Soc. The BMS works well but the install requires an energy monitor with a shunt. Too much work for me and my clients. Their batteries are too small at 3.5 kwh or so. If they changed the size up, and got Soc out to OUtback or Schneider I would use them.
Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsolar/ e-mail offgridso...@sti.net text 209 813 0060 > Awhile back, it was mentioned that missmatched cell voltages could be > corrected with a 6 volt charger attached to each low layer. I tried this > on one and it worked. I have several stacks that have mostly even > voltages > with one cell over charged. Often 8 to 25 volts. Some showed the high > voltage layer when under charge but looked normal when static. Others had > the high voltage even when static. Are these layers just totally > defective > or could the voltage be bled off somehow down to the average. Has anyone > tried this. I have three customers with Aquions that are working well > and > staying balanced. This customer has 24 batteries and 13 show this > problem. > Capacity of the bank is very poor. Customer is ready to call lawyer! Any > ideas? > Tump, yes these include the batteries from Maine but also half of his > original 12 are showing the same problem. > > John Blittersdorf. > CV Wind Service (and Solar) > 200 West Road > N Chittenden, VT 05763 > 802-770-8625 > > > PS Also any feedback on the Simpliphi batteries would be appreciated. I > have just two systems using these so far. Both small. 2 48 v and 5 > 24v. > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
