Friends:
I have a roof-top PV project coming up where we will need to mount some of our feet without benefit of screwing into rafters. This project is an addition to a previous project, and in that iteration we used DPW EZ-feet. We no longer use DPW products, instead we are a Snap-n-Rack house. I am researching if we could integrate the EZ-foot with the Snap-N-Rack, but in the meantime I’d like to ask the hive-mind for any recommendations on direct-to-sheeting mounting options. The roof is metal so we will screw right through the metal, into the roof sheeting. We will seal with butyl sheets. We will connect to TJI joists whenever possible, using longer but narrow screws, but we will fill all the holes on the selected hardware with the properly rated screws. Any advice is much appreciated. Thanks in advance. William Miller [image: Gradient Cap_mini] Lic 773985 millersolar.com <http://www.millersolar.com/> 805-438-5600
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
