Iron ridge has a 3” option
> On Sep 20, 2018, at 2:15 PM, Jason Szumlanski > <ja...@floridasolardesigngroup.com> wrote: > > > I wish! 180mph, Exposure Category D - about as bad as it gets in the US. I > don't think pole mount will work around here. We need a really beefy > structure. It's probably going to have to be custom... and expensive... > > >> On Thu, Sep 20, 2018 at 11:10 AM Lorenzo Ortiz <lore...@cal-solar.com> wrote: >> We've used DPW also with good results. We design for 110 mph winds out here >> and, depending on how high you go, can require some pretty beefy SCH80 >> 8"-10"D pipe. >> MT Solar might be something to look at too. They make multi-pole mounts for >> larger arrays but can get a little pricey. >> >> Good luck! >> >> >>> On Thu, Sep 20, 2018 at 4:55 AM, Jason Szumlanski >>> <ja...@floridasolardesigngroup.com> wrote: >>> Any suggestions for ground mount racks where panels need to have the >>> leading edge 6-8 feet above grade (due to flood level requirement)? Also, >>> high wind area... 100kw system rating. Tilt can be as low as 5-10%. We're >>> getting into carport territory here, but I'm trying to keep the cost >>> reasonable since it won't have a dual function like a carport or shade >>> structure. >>> >>> Jason Szumlanski >>> Florida Solar Design Group >>> >>> _______________________________________________ >>> List sponsored by Redwood Alliance >>> >>> List Address: RE-wrenches@lists.re-wrenches.org >>> >>> Change listserver email address & settings: >>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>> >>> List-Archive: >>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >>> >>> List rules & etiquette: >>> www.re-wrenches.org/etiquette.htm >>> >>> Check out or update participant bios: >>> www.members.re-wrenches.org >>> >>> >> >> >> >> -- >> Loren Ortiz Commercial PV Designer >> >> lo...@cal-solar.com (530) 274-3671 >> >> >> >> >> Showroom located at: 149 E Main St. Grass Valley, CA 95945 >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> www.members.re-wrenches.org >> > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
