To clarify, the altitude restriction that Enphase sets is only related to the Envoy and Combiner Boxes, but does not apply to microinverters or other accessories. Please contact me off-list if you are having any issues with the altitude restriction.
Cordially, Nick Soleil Enphase Energy Product Manager (707) 763-4784 x7267 // office (707) 321-2937 // cell [Enphase_esig_logo6.jpg]<https://enphase.com/> Energy Evolved<http://enphase.com>™ Powering What’s Next™ | The Enphase Energy Management System<http://ow.ly/HbVS3> NABCEP Certified Solar PV Installer #03262011-300 California C10 Licensed Electrician #986315 Texas Master Electrician #284451 ________________________________ From: RE-wrenches <re-wrenches-boun...@lists.re-wrenches.org> on behalf of Darryl Thayer <darylsol...@gmail.com> Sent: Monday, August 20, 2018 11:48 AM To: newrewrenches Subject: Re: [RE-wrenches] Altitude and controllers Of course, the heat rejection rate with a thinner atmosphere is reduced. The electrical capacity is then reduced. At higher altitudes, Outback recommended reduced input. IN your case it would mean smaller modules on the microinverter. On Mon, Aug 20, 2018 at 1:38 PM <ch...@oasismontana.com<mailto:ch...@oasismontana.com>> wrote: Hi Folks: What is the deal with altitude restrictions on charge controllers and other solid state circuitry? We have a high altitude customer with some concerns. For example, Enphase wants their goods installed at under 2000 meters…. Best, Chris Daum Oasis Montana Inc. 406-777-4309 or 4321 406-777-4309 fax www.oasismontana.com<http://www.oasismontana.com> _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org<mailto:RE-wrenches@lists.re-wrenches.org> Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm<http://www.re-wrenches.org/etiquette.htm> Check out or update participant bios: www.members.re-wrenches.org<http://www.members.re-wrenches.org>
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
