I think if the user wants to find the answer, he is going to have to hire someone who can read the CANBUS data out of the LG.
It is very accurate from what I have seen for 2 years now in testing for Schneider. Here is a screen shot from a Raspberry monitoring the LG RESU and supplying the keep alive signal the LG needs. Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsolar/ [1] e-mail offgridso...@sti.net [2] text 209 813 0060 On Sat, 18 Aug 2018 12:57:38 -0700, Jay wrote: Interesting thread as I was just in contact with someone with a LGchem coupled to a solar edge inverter. He's seeing at times 20-25% less capacity than rated kWh and pretty much never actual capacity. Tech support gives some wishy washy answers as to why this would be. Where is the difference, is it in the communication between units or the BMS? And funny as he's never seeing more capacity. Maybe there are some inaccuracies in the BMS's? Standard OB, trimetric and midnight wiz bang meters all require frequent meeting of charge parameters ( volt/amps) to keep the devices accurate. I've got 4 meters that I compare and if they are full daily it's about 1-2% difference between them. If it's been 7-10 days since full, then they could be off by 10-15%+ off. Curious what others are seeing Jay Peltz power. On Aug 18, 2018, at 9:40 AM, Jerry Shafer wrote: Lou Sounds like you are having the same issue we did, l adjusted the size of the battery down to 50% of the battery rating and so far the values appear to follow in. We will also be installing a DC CT on the egauge to see and have a better idea of whats going and out outside of the BMU Jerry On Fri, Aug 17, 2018, 12:09 PM Lou Russo wrote: Hello All, Does anybody have any insight in getting the SOC to report accurately on the Outback FNDC when using batteries that have a minimal voltage curve? I have several systems with LFP batteries that have both a eGauge (communicating directly with the battery BMU) and a FNDC and I get wildly different SOCs. In a typical 24 hour period (12am-12am) I get SOCs on the FNDC that vary 2% to 34% of what the battery BMUs are reporting. I am assuming that the BMUs are reporting accurately. I would think a 1%-5% difference would be acceptable. Any help or thoughts on this subject would be greatly appreciated. Aloha, Lou Russo l...@spreesolarsystems.com [5] 808 345 6762 Spree Solar Systems LLC CT-34322 _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org [6] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [7] List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html [8] List rules border-left:#1010ff 2px solid; margin-left:5px; width:100%"> _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org [11] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [12] List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html [13] List rules & etiquette: www.re-wrenches.org/etiquette.htm [14] Check out or update participant bios: www.members.re-wrenches.org [15] -- Links: ------ [1] http://members.sti.net/offgridsolar/ [2] mailto:offgridso...@sti.net [3] mailto:jerrysgarag...@gmail.com [4] mailto:l...@spreesolarsystems.com [5] mailto:l...@spreesolarsystems.com [6] mailto:RE-wrenches@lists.re-wrenches.org [7] http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [8] http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html [9] http://www.re-wrenches.org/etiquette.htm [10] http://www.members.re-wrenches.org [11] mailto:RE-wrenches@lists.re-wrenches.org [12] http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [13] http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html [14] http://www.re-wrenches.org/etiquette.htm [15] http://www.members.re-wrenches.org
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
