Jay Just copper stock is not good enough necessarily...make sure it is specified for electrical current carrying. I have seen some spectacular failures with people using plumbing pipe malled flat and drilled. It is was too soft to handle the heat at high currents! I do not know the exact specs, but it should be listed for that purpose....not a good application to go cheap!
Bill On Dec 1, 2017 10:07 PM, "Matthew Sirum" <matthewsi...@gmail.com> wrote: > Greetings Jay, > > I second the Storm Power Components (formerly Storm Copper) > recommendation https://stormpowercomponents.com/ > > In addition to Storm you may also like to take a look at: > > Farmers Copper http://www.farmerscopper.com/ > > Watteredge Products (now renamed as parent company Southwire) > http://www.watteredge.com/ > > Electric Equipment & Engineering Company (EEE) http://eeeusa.com/ > EEE manufactures interconnects, bus bars, terminal plates, and etc for > some of the industrial battery system companies. If you are looking > for cell interconnects for stringing 2-volt cells together they may be > a resource. > > You may remember the custom DC bus system pictures I shared with you a > while back; I sourced the large DC battery system circuit breakers > from EEE and the C11000 copper bar stock and insulators came from > Storm. Here is the last contact I had with EEE: Mike Morroni, phone: > 303.296.1476 ext: 21, email: mike.morr...@eeeusa.com > > As Tump mentioned, McMaster-Carr as well as Grainger and MSC also sell > copper stock. > > Best regards, > > ----MATT > > Matthew Sirum > P.O. Box 1227 > Greenfield, MA 01302-1227 USA > phone: +1.413.773.0611 > email: matthewsi...@gmail.com > > > ---------- Original Message Below ---------- > > [RE-wrenches] battery buss bar stock > > jay jay.peltz at gmail.com > Fri Dec 1 08:06:00 PST 2017 > > HI All, > > I’m wondering if anyone has a good source for battery buss bar stock. > Either pre made ones or stock I can use to make myself. > > It would be for larger Rolls GEL 2v in this case but other battery > sizes/types as well. > > thanks > > jay > > peltz power > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches. > org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
