Can you read the load from the inverter? On the Outback systems you can read the API from the MATE3 via ethernet/JSON string.
On Tue, Aug 29, 2017 at 5:37 PM, Howard Arey <scot.a...@solarcentex.com> wrote: > Not SOC issue but rather a peak inverter output issue: 5,000 watts con and > 6,600 surge for 10 seconds (I believe the latter is right number). That is > the constraint I’m trying to live under. > > > > *From:* RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On > Behalf Of *Chris Mason > *Sent:* Tuesday, August 29, 2017 4:34 PM > *To:* RE-wrenches <re-wrenches@lists.re-wrenches.org> > *Subject:* Re: [RE-wrenches] anything like Generac Smart Management > Module for a solar critical backup panel > > > > If there is an API from which you can determine SOC, you how to do load > management with a Raspberry Pi. I can help with that if you want. > > > > On Tue, Aug 29, 2017 at 3:55 PM, Howard Arey <scot.a...@solarcentex.com> > wrote: > > Hello again, wrenches. > > > > I know many of us have run into the quandary and that is prioritizing > loads in a critical load panel. > > > > About to put in some LG RESU units with the SE7600 StorEdge and the 21 > amps continuous is pretty tough. > > > > But with some smart, automated load management, this can work just fine. > > > > Is there anything like the Generac SMM (http://www.generac.com/all- > products/transfer-switches/home-backup) out there that does not depend on > decreasing cycles/hz to recognize its bumping into max load conditions? > > > > *Howard “Scot” Arey* > > 254-300-1228 <(254)%20300-1228> > > scot.a...@solarcentex.com > > > > [image: Solar Centex Logo - No Back.png 10 percent resize] > > > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches. > org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > > > > > -- > > Chris Mason > > NABCEP Certified Solar PV Installer™ > > Solar Design Engineer > > Generac Generators Industrial technician > > > > www.cometsolar.com <http://www.cometenergysystems.com> > > 264.235.5670 <(264)%20235-5670> > > 869.662.5670 <(869)%20662-5670> > > Skype: netconcepts > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches. > org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > > -- Chris Mason NABCEP Certified Solar PV Installer™ Solar Design Engineer Generac Generators Industrial technician www.cometsolar.com <http://www.cometenergysystems.com> 264.235.5670 869.662.5670 Skype: netconcepts
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
