Dan,
 That is an Outback stock item called FX/GS fan kit I believe. Cost about 2$20 
with additional SS replacement screws included for either inverter.

I just changed one on an early model FX2524.  Pretty simple change. They 
recommend doing it while it is on its back instead of on the wall and that does 
help the reassembly quite a bit. 

Good luck,

Wallace Stahle
Future Electric Energy Co
P O Box 236
Willits, CA 95490
[email protected]
CA Lic.# C10-762093
707-459-0474



On Mar 27, 2017, at 7:35 AM, Dave Palumbo wrote:

> Fellow Wrenches,
>  
> I have an OutBack FX inverter (manufactured in 2011) with a flashing Red LED. 
> The MATE warns "Internal Fan Failure Detected" .
> Before I call OutBack support I'd like to gain a little knowledge from you 
> folks.
> ·         Will I be asked to send the inverter in, or can I get the internal 
> fan sent out to me so I can repair it myself?
> ·         I used to perform internal power board swaps myself 10 or 12 yrs 
> ago.
> ·         It's not on warranty so I'd be paying for the parts.
> Thanks for your time,
> Dave
>  
> David Palumbo
> Independent Power LLC
> 462 Solar Way Drive
> Hyde Park, VT 05655
> 802-371-8678 cell
> 802-888-4917 home
>  
>  
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: [email protected]
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://www.mail-archive.com/[email protected]/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 

_______________________________________________
List sponsored by Redwood Alliance

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/[email protected]/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to