Peter: Would these work?
http://www.garvinindustries.com/conduit-fittings-supports/rigid-conduit-fittings/split-grounding-bushings/sgb50?gclid=CI7R876yvNICFQmIfgodVAkI3g William > On Mar 3, 2017, at 11:14 AM, <[email protected]> > <[email protected]> wrote: > > Recently we were asked to do a combined inspection and engineering review of > a 362.70 kWdc PV system using 5 Sungrow SG60KM-U inverters. We found issues > like palm trees and air handling equipment shading significant parts of the > arrays, electrician’s tape and palm fronds on the surface of the modules. But > we also observed two significant Code violations: PV source conductors lying > on the surface of the torch-down roof and lack of bushings at the connectors > on the ends of 2” LFMC. The PV source conductors got secured and we saw > bushings threaded onto the ends LFMC connectors. > > Upon close inspection we discovered that the bushings had been broken at one > point on their circumference, no doubt to simplify their attachment. Their > were 11 PV source circuits (22 current-carrying 10 AWG PV Wire conductors.) > > Is this a NEC Code violation? If so, what section would we cite? It seems > obvious that the bushing had been “modified”, but I would like to be more > specific. Or does it come under the workmanship category? > > Regards, > > Peter Parrish > > Peter T. Parrish, Ph.D., President > SolarGnosis > 1107 Fair Oaks Ave. > Suite 351 > South Pasadena, CA 91030 > (323) 839-6108 > [email protected] > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
