Re: [RE-wrenches] Generac EcoGen 6

[Gary Willett]

DAVE: If you have not already gone down this path, there could possibly be a short somewhere on the normally open 2-wire start wiring. Try temporarily lifting these conductors in the generator enclosure and see if issue goes away. Regards, Gary Willett Icarus Engineering / Solar Services LLC On 12/30/16 8:14 AM, Dave Palumbo wrote: Wrenches,   I have a 6 kW Generac EcoGen (1,300 hrs on it) with a new problem. ·         After swapping in a new battery the other day  the generator now starts and runs when its start switch is positioned to Auto. ·         The OutBack inverter w Mate2 is not calling for an auto start. ·         Even when the EcoGen is disconnected from the off grid house it still starts and runs every time the start switch is set to Auto.   How do I clear this problem and get this gen back to normal?   Thanks and Happy New Year, Dave   David Palumbo Independent Power LLC 462 Solar Way Drive Hyde Park, VT 05655 802-371-8678 cell 802-888-4917 home     _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org