Interesting product, and good for standard stranding conductors, as their UL 486C certification attests.
They are however a screw to conductor connection device and will have the same limitation when used with finely stranded conductors as the standard Polaris splices. The Polaris grey connectors have a metal sleeve already in the port as part of the device, which the screw crushes against the fine stranded conductors - essentially performing the same function as installing ferrules on the conductors. Glenn From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Chris Worcester Sent: Thursday, August 11, 2016 10:33 AM To: 'RE-wrenches' Subject: Re: [RE-wrenches] Pass through/transition box for Enphase When we have the Enphase 240 VAC trunk line branching in two directions we use these 300V rated Alumiconn 3 port connectors, to make them up to the #10 THWN-2. These are a scaled down version of the Polaris insultaps. http://www.kinginnovation.com/products/20/3-port-alumiconn Chris Worcester Solar Wind Works NABCEP Certified PV Installer Office 530-582-4503 Cell 530-448-9692 Fax 530-582-4603 www.solarwindworks.com ch...@solarwindworks.com From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Jeremy Rodriguez Sent: Wednesday, August 10, 2016 6:32 PM To: RE-wrenches Subject: Re: [RE-wrenches] Pass through/transition box for Enphase How about these? https://idealind.com/us/en/products/wire-termination/set-screw-connectors/se t-screw-connectors/set-screw-wire-connectors.aspx Jeremy Rodriguez Solar Installation And Design Expert All Solar, Inc. 1463 M St Penrose Colorado 81240 Sent by Jeremy's iPhone. Sorry for typos and shorthand! On Aug 8, 2016, at 2:00 PM, Benn Kilburn <b...@skyfireenergy.com> wrote: Din rail mounted terminal blocks.... Weidmuler WDU6 or WDU10, depending on the wire size you are using. Benn Kilburn SkyFire Energy Inc. 780-906-7807 On Aug 8, 2016, at 12:49 PM, Jason Szumlanski <ja...@floridasolardesigngroup.com> wrote: I'm looking to bring 8 Enphase 240V circuits in multiple conduits into an enclosure inside the attic where I can transition to Romex. I'd rather use some kind of rail mounted terminals in an enclosure or something rather than making splices in a generic j-box. I'm not looking to combine circuits - just transition from THWN to Romex and keep things neat an organized. Any suggestions? Jason Szumlanski _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
