Reading the link, I'm not sure what the following sentence refers to, the price of the system or the batteries.

"The batteries are priced at $10,000 for the 4 kWh model up to $24,000 for the 16 kWh model."

Literally it says that the cost is $10K for 4 KWh batteries. When compared to the $24K system cost for a system 4 times as big, it would seem that they are referring to whole system costs with the same equipment but more batteries.

They wouldn't sell 4 times as many batteries for 2.4 times the cost (would they)?

If it is 4 kWh of batteries alone for $10K, that wouldn't be much of a deal, even if they did last 10 years. We are doing far better than that with AGM, which should last 7 years. If it is for the entire system, it might start looking competitive.

At 09:54 PM 6/17/2016, you wrote:

Enclosed is a photo of what appears to be a test/lab Sonnen system published in the 01/30/2016 edition of "Power Magazine.

Can plainly see the 8kW Outback Radian inverter and I assume four 12V Sonnen (Sony?) 8kWh Lithium-Ion batteries. Assume this is a "standard" 48V Radian inverter.

<http://www.powermag.com/german-battery-firm-sonnen-moves-into-u-s-home-solar-storage-market/>http://www.powermag.com/german-battery-firm-sonnen-moves-into-u-s-home-solar-storage-market/

Regards,

Gary Willett

Icarus Engineering LLC
[]


On 6/17/16 2:09 PM, Chris Mason wrote:
Yes, correct on both. The generator support is there, I did not use it.

On Fri, Jun 17, 2016 at 3:07 PM, Carl Adams <<mailto:swingjun...@gmail.com>swingjun...@gmail.com> wrote:
Chris,

Nice finish on the Sonnen install. It looks fabulous. My understanding is the Eco 2-8 integrate the 4kW radian, and the 10-16 incorporates the 8kW radian. I assume generator support is fully supported

On Fri, Jun 17, 2016 at 8:35 AM, Chris Mason <<mailto:cometenergysyst...@gmail.com>cometenergysyst...@gmail.com> wrote: I promised a picture of the Sonnen installation. As these units are getting close to being appliances in the same vein as home audio, we wanted to have a clean finish so we made some mill work to complete the top of the unit to the ceiling and hide the ugly conduits.
<https://www.dropbox.com/s/vlh0uumlgf5549g/2016-06-15%2011.00.44-1.jpg?dl=0>https://www.dropbox.com/s/vlh0uumlgf5549g/2016-06-15%2011.00.44-1.jpg?dl=0

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to