How about squirting some silicone dielectric grease into the contacts before mating and wrapping the connection with the sticky black tape used on coaxial cable for outdoor antenna work. I don't have a name handy here on my phone, sorry.
Glenn -----Original Message----- From: "Kirk Herander" <vtso...@icloud.com> Sent: 6/6/2016 17:28 To: "RE-wrenches" <re-wrenches@lists.re-wrenches.org> Subject: [RE-wrenches] Canadian Solar / MC4 connectors in a marine environment Hello, I am debugging a Florida ocean-side 35 kw array using 4 year old Canadian Solar panels, which I've never had a high opinion of, installed by others. I've discovered several not-so-good problems, such as low insulation resistance through the panels, ONLY when raining, early to mid-morning condensation, or by using the last resort of spraying the panels with a garden house and watching the SMA inverters shut down due to failing their self "Riso" (that's the IRT) test creating a ground fault error. That aside, what's just as interesting is that about 8 or 9 of the module interconnections were basically oozing the aqua-blue copper tarnish. I've never seen this in any installation before. Either the MC4s weren't crimped and tightened at the factory well, or the connectors were seated poorly, although that doesn't seem to be the case. BTW, I replaced all these dubious MC4 connectors and the ground faults still occur when the panels are wet. The bigger issue is the panel warranty, but is there anything on the market which could seal these connections, perhaps a type of "clamshell" to provide an extra layer of protection, which is removable if need be? There's always glue-filled heat shrink, but ideally I don't want anything permanent surrounding the connectors. Has anyone ever seen what I'm describing in a marine environment? Kirk Herander Owner|Principal, VT Solar, LLC Celebrating our 25th Anniversary 1991-2016 www.vermontsolarnow.com dba Vermont Solar Engineering NABCEPTM 2003 Inaugural Certificant VT RE Incentive Program Partner 802.863.1202
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
