The Remote Operating Circuit Breakers failed.
At 11:05 AM 5/13/2016, you wrote:
Hi Drake,
Are you saying that the relays have failed or the breakers?
Jay
Peltz power.
On May 13, 2016, at 7:37 AM, Drake
<<mailto:drake.chamber...@redwoodalliance.org>drake.chamber...@redwoodalliance.org>
wrote:
William and Wrenches,
The lack of room in the GSLC becomes much worse
when using the factory installed AC coupling
"solution" using the Remote Operated Circuit
Breaker or ROCB. This takes up 3 breaker spaces
plus puts two relays under the breaker column.
I had to change out the ROCB twice in the one system I installed.
The ROCB "solution" takes AC coupling, which is
essentially straight forward and complicates it
exponentially. Plus the ROCB itself is prone to
failure, which could ruin a set of batteries.
There are numerous other serious problems with
their approach. With "solutions" like this one, who needs problems!
Drake
At 02:52 PM 5/12/2016, you wrote:
Wrenches:
Ã
The recent topic about bypass connections for
the Radian is a very pertinent issue for
anyone designing a Radian system.Ã The
problem is exacerbated by what I perceive is
one poor design aspect of the GSLC cabinet.Ã
Ã
I generally like the Radian series, including
the GSLC.Ã I do find it puzzling that
installers are expected to make connections to
the rear of panel mount circuit
breakers.Ã This has to be done blind and in
very tight quarters.Ã This is further
complicated by the expectation that one will
install AC and DC circuit breakers in the same panel.
Ã
We have tried leaving slack on the leads so
the panel can be rotated, but that leaves more
lead length than the cabinet will handle.Ã
Ã
Our solution is to move all AC breakers out of
the GSLC and into adjacent, off-the-shelf load centers.Ã
Ã
We put the minimum PV breakers in the panel,
located at the top for maximum latitude on
tilting the panel out for access.Ã We also
pre-install the breakers in the panel in a
bench vise with extra lead length and install
the panel as a unit, hopefully never requiring access to the rear again.
Ã
I applaud the GSLC as a decent product, but it
does need improvement in this area.
Ã
Sincerely,
Ã
William Miller
Ã
Ã
Gradient Cap_mini
Lic 773985
<http://www.millersolar.com/>millersolar.com
805-438-5600
Ã
Content-Type: image/jpeg; name="image003.jpg"
Content-Disposition: inline; filename="image003.jpg"
Content-ID: <image003.jpg@01D1AC44.B41D2EA0>
X-Attachment-Id: 29fc30ce3a67e929_0.1
_______________________________________________
List sponsored by Redwood Alliance
List Address:
<mailto:RE-wrenches@lists.re-wrenches.org>RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address:
<mailto:RE-wrenches@lists.re-wrenches.org>RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
<http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
<http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html>http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
<http://www.re-wrenches.org/etiquette.htm>www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
<http://www.members.re-wrenches.org>www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
