We have both GT and off grid in the shadow lines, because of the distance
away, diameter of the wire and also the sun have not seen any issues that
will warrent micro inverters. All that said, its a moving target and if the
wires are very close then it will be more of an issue.
Something else to ponder can you in fact install under HV transmission
lines in your area.
Jerry
On Feb 24, 2016 5:50 AM, "Paul Lyons" <ly...@zapotecenergy.com> wrote:

> Hell RE-Wrenches –
>
>
>
> Do any of you have experience with locating ground-mounted PV systems
> under high-voltage transmission lines? We have an electric utility client
> who would like to use some of its land underneath its HV transmission lines
> to install PV. Is the shadow cast be the overhead wires significant enough
> to affect the string voltages in the array? Should we go with
> micro-inverters?
>
>
>
> Thank you,
>
>
>
> Paul Lyons, P.E.
>
> Zapotec Energy Inc.
>
> 675 Massachusetts Ave
>
> Cambridge, MA 02139-3309
>
> Tel: 617-547-5900  ext.201
>
> Email: ly...@zapotecenergy.com
>
> Web: www.ZapotecEnergy.com
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to