I spoke with Outback today and I've got some options for sure, from everyone. Thanks!
Jeremy Rodriguez Solar Installation And Design Expert All Solar, Inc. 1463 M St Penrose Colorado 81240 Sent by Jeremy's iPhone. Sorry for typos and shorthand! > On Feb 2, 2016, at 8:59 AM, Jay <jay.pe...@gmail.com> wrote: > > That's a very trick way to do it! > > A somewhat less expensive way would be to use a 3rd VFX on the leg you want > the added power on. > > Jay > Peltz power. > >> On Feb 1, 2016, at 9:09 PM, William Miller <will...@millersolar.com> wrote: >> >> Jeremy: >> >> I have often wondered this question since the Trace SW days: Since the >> Radian offers generator support, why not connect the FX inverters to the >> generator input of the Radian? Program the Radian to expect 30 amps per >> leg. If the load exceeds 30 amps, the Radian will kick into gen-support >> mode and aid the FX inverters. If the load is less than 30 amps, the >> Radian goes to sleep. >> >> William >> >> >> >> Lic 773985 >> millersolar.com >> 805-438-5600 >> >> >> -----Original Message----- >> From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On >> Behalf Of Jeremy Rodriguez >> Sent: Monday, February 01, 2016 7:57 PM >> To: re-wrenches@lists.re-wrenches.org >> Subject: [RE-wrenches] Increasing output Amps, Off Grid >> >> Hello >> I don't think an OB Radian can be added to an existing stacked pair of >> FX's. At least easily and have all three inverters work happily with each >> other. Can it? >> >> My client is wanting more output. Even if it's just one leg of 120/240. He >> is planning to wire a circuit to an outbuilding. 120 v only is fine. He >> has overloaded the dual 3648 set up once before. I recommended another >> pair of FX3648 inverters with autoformer. >> Comments and recommendations appreciated. >> Thanks in advance >> >> Jeremy Rodriguez >> Solar Installation And Design Expert >> All Solar, Inc. >> 1463 M St >> Penrose Colorado 81240 >> >> Sent by Jeremy's iPhone. Sorry for typos and shorthand! >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.htm >> l >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> www.members.re-wrenches.org >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> www.members.re-wrenches.org > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
