The cheapest solution I have been able to find for this over the past 12 months has been PV wire. The other problem you might find is 1000V listed components to transition from PV wire to other types of wire.
Matt On Thu, January 28, 2016 7:48 am, Kirpal Khalsa wrote: > Hello Friends! > I am looking for 1000v rated #6awg wire suitable for running in conduit > from roof top combiner down to the inverter....what are others using for > this application? Ideally I would love to find some THHN or THWN-2 but > with 1000v rating....any suggestions, sources? > Application is from a SolarEdge commercial optimizers based array which > puts out 850VDC.... Thank you! > _______________________________________________ > List sponsored by Redwood Alliance > > > List Address: RE-wrenches@lists.re-wrenches.org > > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.ht > ml > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > Matthew Partymiller Solar Energy Solutions LLC (877) 312-7456 m...@solar-energy-solutions.com _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
