Hi Mark, If all battery power flows in and out of Sunny Island(s) then it will keep track of SOC without a external shunt. I'm not sure how it does it but all the SOC dependent controls work fine in that scenario. The SOC algorithm calculation works much better than any other that I've used. On Jan 16, 2016 1:34 PM, "Mark Frye" <ma...@berkeleysolar.com> wrote:
> Folks, > > I know with both the Radian and the SI you can use an external shunt to > support the measurement of KWH and support various SOC controls. > > But what happens if you don't use an external shunt? > > I am pretty sure that the Radian does not have an internal shunt to > support SOC control. > > What about with the SI? Does it implement it's SOC controls even without > an external shunt? > > Thanks, > > Mark Frye > Berkeley Solar Electric Systems > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
