Afternoon wrenches, I have a friend who I helped install second hand modules onto a pergola structure at their home.
The system is as follows: 44 - Siemens SP-150 1 - SMA SB6000US-12 (XFMR unit) Since install, they have not produced half of what they should be. I have tested the diodes and they seem to be good, there were a couple that tested questionable, so they were replaced. VOC is good, but it seems that under load the system goes to garbage. I am at a loss of what/how to test anything else that may determine cause. Would a PV Analyzer help? Would there happen to be anyone in the Sacramento area with one who could come to the site? Obviously the customer will pay for their time. Thanks in advanced. SMA America, LLC Steve Jefferson Service Line Supervisor 3925 Atherton Ave Rocklin, CA 95765 - 3714 U.S.A. Tel: +1 916 625 3185 (direct) Fax: +1 916 625 0871 Mobile: +1 916 622 4253 Email: steve.jeffer...@sma-america.com<mailto:steve.jeffer...@sma-america.com> www.SMA-America.com<http://www.sma-america.com/> [cid:image001.png@01CF1CFA.FE18BEB0]<http://www.youtube.com/watch?v=yQWzPuyqhzo&feature=youtu.be> This email and any attachments thereto may contain SMA America, LLC confidential, privileged and private material for the sole use of the intended recipient. Any review, copying, or distribution of this email (or any attachments thereto) by others is strictly prohibited. If you are not the intended recipient, please contact the sender immediately and permanently delete the original and any copies of this email and any attachments thereto. Thank you.
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
