Wrenches I would open it up during a sunny day low humidity with it running and dry it out, close it up and check again . I had 8 non SMA inverters get water in them but it was 1/2 qt of water in mine. SMA inverters are sealed so if itw moist inside it cant get out and this will resolve it. Jerry On Nov 11, 2015 12:58 PM, "Jay" <jay.pe...@gmail.com> wrote:
> Hi all > > > I've got a newly installed 7700 TL that the display gets foggy after rain. > > Inverter is mounted outside, under an eve. > Seal inside appears in good shape, screws are tight. > > Anybody have this problem before/ and fixes? > > Thanks > > Jay > > Peltz power. > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
