Hi All, In the early days with PV and SWH we didn’t use flashings for most roofs (except tile). We used L-feet directly to the roofing with butyl (comp) or EPDM (metal) and pre-filled our holes and covered the attachments with good goop. We've never had a leak reported from this practice. And, here in western Washington State, it does get tested. We changed methods about 10 years ago deciding it would be good practice - both legally and professionally - to follow roofing industry guidelines that prescribe (if you consider attachments “penetrations”) the use of flashings.
This spring we had our first leak, from a 2-year old system, on a 4:12 comp roof, with flashed L-feet. The leak occurred through a roofing nail hole that our installers had pulled but didn’t quite get covered up by the flashing or sealant. Even though the hole was still “shingled” by 2 layers of overlapping comp, the concentrated storm runoff from the module edges overwhelmed the ability of the shingles to shed the water. We fixed the problem, reroofing the section and fixing the damage to the ceiling, but not to our reputation and pride. Even though this issue was caused by a combination of procedural error and specific geometry, it’s easy to imagine this could happen again. Installers moving fast on roofs and not being able to see exactly where those nails they are pulling are coming from. And, when it’s cold out older comp shingles can crack when trying to get the nails out. If “best practices” for our industry could be established/recognized that prescribed our former methodology with L-feet, I would be happy to return to it (customers would also get lower costs). As of now, however, “best practices” for us mean following the roofing industry standards. -Kelly Kelly Keilwitz, P.E. Principal Whidbey Sun & Wind Renewable Energy Systems NABCEP PV Installation Professional WA Electrical Administrator ke...@whidbeysunwind.com PH & FAX: 360.678.7131 On Aug 26, 2015, at 7:44, jay <jay.pe...@gmail.com> wrote: > Didn’t know there was a pole. > I”m on the flash side. > > Question for those who don’t. > How would your insurance claim work if you didn’t flash? > > jay > > peltz power > > >> On Aug 25, 2015, at 9:59 PM, Jason Andrade <ja...@westcoastsustainables.com> >> wrote: >> >> I wouldn't install a comp roof system without the flashings myself, I am in >> Northern California and the extreme weather both heat and cold are murder on >> roofing. >> >> Jason >> >> West Coast Sustainables >> Jason Andrade >> C-46# 974647 >> (530) 410-4745 Cell >> (530) 241-7498 Office >> (530) 348-5301 Fax >> ja...@westcoastsustainables.com >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
