I would check out quick mount. One of their flashing is 12" x 12". Plus solid documentation
Jay Peltz power. > On Aug 5, 2015, at 3:30 PM, William Miller <william.mil...@millersolar.com> > wrote: > > Friends: > > We have been using the Eco-Fasten flashings for comp roofs. We have a few > complaints: > > 1. We have been using the Eco-Fasten blocks and Unirac serrated L-feet. > There is not enough room below the foot to install the neoprene washer, the > block, the bonded washer, the washer, the lock washer and the nut. The > L-foot runs into the nut. > 2. The flashing is not wide enough (12” high by 8” wide). If the flashing > ends up on the split between two 3-tab shingles there is an obvious leak path. > 3. The company does not offer a decent cut-sheet. This is crucial to the > permit authoring process. > 4. We can’t seem to get the rail height correct. We would prefer about 4” > to the top of the rail. > a. The L102-3 results in a rail height of 3”. > b. The L102-6 is 6” rail height—this is too high. > c. The block with the Unirac serrated L-foot results in 3-3/4”, but the > combination of parts does not really fit and it is expensive. > > We have also tried the Iron Ridge and it seems to offer some improvements: > 1. The flashing is larger (12” by 12”). > 2. The rail height is about 3-1/4”, still a little low. > > I posted some photos and comments on our web site: > http://www.millersolar.com/MillerSolar/case_studies/Flashed_roof_attachments/FlashedRoofAttachements.html > > Do any of you have any suggestions for a flashed foot system with a rail > height of about 4” and a wider flashing? Do any of you have any comments on > products you like or don’t like for our review? > > Thanks in advance. > > William Miller > > <image003.jpg> > Lic 773985 > millersolar.com > 805-438-5600 > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
