If you are looking for Square D, Page 1-24: http://static.schneider-electric.us/assets/digest/17601.pdf
There is a solar ready lug kit (part number SR69094A) to add lugs to the line side of the main breaker. The easiest combination devices I have seen have a separate standard 2-pole breaker that is a separate service disconnect. We see these a lot, but usually the second service disconnect is already feeding a pool subpanel or detached garage. Regardless of what you choose, make sure it's on the "approved list" with your utility. [image: Logo-Sq-80.png] Jason Szumlanski Principal Solar Designer Florida Solar Design Group (239) 491-8010 office (239) 322-5079 direct/mobile Authorized Sales Agent for Fafco Solar [image: Fafco-Solar-Enphase-Logo.png] License CVC56701 On Mon, May 25, 2015 at 12:39 AM, frenergy <frene...@psln.com> wrote: > Wrenches, > > Customer currently has a hacked up 200 amp Sylvania meter/mains > panel. He also is averaging a load of 74 KWhrs/day! which will require > about 15 KW system size at this site. Obviously a system this size cannot > backfeed the busses in the load center. Because the exiting panel is a > mess anyway, I'm suggesting it gets changed out. > > What sort of new 200 amp service would facilitate a clean supply > side connection. One thought is have separate Utility meter socket then a > 12 X 12 J-box with a monster power distribution block in it and then a > distribution panel (without the meter socket)...this being a way to insert > a means to grid-tie between the meter and the 200 amp main breaker. A > little spendy but nothing like going to higher amp service to be able to > load side connect. > > A 400 amp panel is not an option as the existing 165' of 3" pvc > underground conduit to the pole currently has 4/0 alum. The utility says > it would have to be 4" for the new cable and the cost $10K+ for the upgrade. > > Other ideas?? > > Thanks in advance > > Bill > > Feather River Solar Electric > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
