I have seen a lot of installs using the Zilla Phantom mount. Can't speak to its adherence to standards however, as your mileage may vary.
Sincerely, Glenn Burt Sent from my 'smart' phone so please excuse grammar and typos. -----Original Message----- From: "will...@millersolar.com" <will...@millersolar.com> Sent: 4/28/2015 16:50 To: "RE-wrenches " <re-wrenches@lists.re-wrenches.org> Subject: [RE-wrenches] Attaching to roof sheeting Friends: I'd like to bring up the subject of fastening roof mounts directly to roof sheeting. We have occasionally a need to do a roof mount on tile or comp roofs where we cannot guarantee finding rafters in a useable locations. We researched this in 2013. We discovered the DPW EZ feet product. When we researched further, the manufacturer of the screws being used told us that the screw had not been tested with standard roof sheeting materials. The need has occurred again and we want to renew our search for options. Are there any direct-to-sheeting attachment options that have been certified for suitability in North America? Thanks in advance. William Miller Gradient Cap_mini Lic 773985 millersolar.com <http://www.millersolar.com/> 805-438-5600
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
