Hello,
I have an older 10 collector system in which the glycol has stagnated due to a defective collector sensor, apparently for some time. I was able to drain the collectors, the cooked glycol is black with a good bit of sediment. I tried to flush the system with water but my ½ hp utility pump could not pump the water entirely through the collectors. Suction slowed down and stopped after just a few gallons, as if the pump couldnt overcome the effective head of the system. I had no problem using this pump to charge the loop when it was commissioned. I suspect the collectors may be gummed up with cooked glycol. I guess compressed air is next to try. Are there any safe chemicals to use to purge / un-gum the collectors? Thanks. Kirk Herander VT Solar, LLC Proven PV provider since 1991 www.vermontsolarnow.com dba Vermont Solar Engineering NABCEPTM Inaugural Certificant VT RE Incentive Program Partner 802.863.1202
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
