Just be sure to properly bond it to ground per 250.8 & 12, and 250.4. Sincerely, Glenn Burt Sent from my 'smart' phone so please excuse grammar and typos.
-----Original Message----- From: "Matt Sherald" <m...@getpimby.com> Sent: 4/17/2015 9:08 To: "RE-wrenches" <re-wrenches@lists.re-wrenches.org> Subject: Re: [RE-wrenches] Wire protection for ground mount Adam, I've used aluminum perforated sheet metal in the past. It matches the other aluminum on the ground mount and it can be zipped up with self drilling screws. Looks pretty sharp when it is done - kinda like it was meant to be there all along. -Matt On Fri, Apr 17, 2015 at 7:20 AM, AE Solar <autonomousenerg...@gmail.com> wrote: > Hey Wrenchers, > > Does anyone have suggestions for netting/protecting wires behind a ground > mount (for keeping hands out of there...not animals). I have seen quite a > few home-made'ish looking options on systems around here (screwing hardware > cloth onto the back of frames/racking, etc) but am looking for a more > professional option....ideally something that is as clean looking as > possible. For what its worth the panels will be (4) high in landscape. > Thanks for any thoughts. > > Adam > > Adam Katzman - Owner/Operator > Autonomous Energies > 4872 State Route 9G > Germantown NY, 12526 > www.AutonomousEnergies.com <http://www.autonomousenergies.com/> > (518) 567-1468 > > > -- > Adam Katzman > Autonomous Energies > 4872 State Route 9G > Germantown NY, 12526 > www.autonomousenergies.com > (518) 567-1468 > > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > > -- Matt Sherald PIMBY Energy, LLC NABCEP Certified Solar PV Installer® 304-704-5943 www.getpimby.blogspot.com www.getpimby.com
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
