Hi Lou,
There should be two screws at the top of the module. Remove these and on
a very hot day you should be able to start at the top edge and peel it
down. Don't hurry. Once started, a heat gun to the bottom will speed it
up. If some stick-um gets left on the roof, you'll need a solvent to
loosen it (can't remember, WD40?).
So, after all that effort you will have a used Uni-Solar 68 Watt PV mod
that is worth about $50 to someone that knows about the performance of
those amazing modules.
Larry Crutcher
Starlight Solar Power Systems
On 3/3/15 4:33 PM, Lou Russo wrote:
Wrenches,
Has anyone ever removed these from a metal standing seam roof? If so,
was the module or roof damaged? If not, then is there a market for
these used panels?
Thanks for any insight.
Aloha,
Lou Russo
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
