Hi Jay,  thanks for that info – as a matter of interest, do you happen to have 
a Shurflo part number for that  “End Bell Brush kit”          Where do you 
obtain that part from?

 

Also appreciate your comments on Sunpumps & Grundfos SQflex.                    
    Cheers,        John V

 

From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf 
Of jay peltz
Sent: Wednesday, 18 February 2015 4:50 a.m.
To: RE-wrenches
Subject: Re: [RE-wrenches] Shurflo 9325 pump.....

 

Hi john

 

What you are looking for on the brushes is

 

End bell brush kit. $27

 

But I highly recommend Sunpumps brand submersible pumps. Vastly superior 
design, much easier to repair, and connecting the wires is super easy and won't 
leak

 

On the overall pump design all these diaphragm pumps require rebuilding or they 
will fail internally, then leak, then fill up with water which is kind of hard 
on them. 

 

If you look at life cycle cost, the grundfos SQflex, is a much better deal, IMHO

 

Jay

 

Peltz power. 

 





 


On Feb 16, 2015, at 11:49 PM, "John" <j...@gosolar.co.nz> wrote:

Hi all,

 

Can I call on the expertise of anyone involved with these pumps.   The problem 
seems to be that the manufacturer wants to supply *kit* of parts and not 
individual parts, like the brushes, which apparently need to be replaced every 
year.     Same with the cable adaptor – you have to buy a kit that includes all 
sorts, when you only need one individual piece.

 

I realize why the manufacturers do this, but if you only need brushes, why have 
to buy a whole Upper Housing kit.   And the Lower Housing kit only seems to 
have the Beige/cream colored diaphragm instead of a black one – are the black 
replacement ones unobtainable??

 

Also buying outside the U.S. poses a problem as agents don’t always have what 
you need/want.

 

These are a good little pump and it appears they are a part of the great 
Planned Obsolence way of the world, replacing next higher assemblies instead of 
the required necessary parts.   Any good contacts on the West Coast for some 
bits & pieces for these good little pumps.

 

                                Cheers for any & all help/advice – John Veix,   
   New Zealand 

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to