The Magnums do not have relays available like the old SWs, but you can run a Zephyr directly from either a Outback FM controller or a Midnite Classic. Both have a controlled 200 mA, 12 output. I've had occasional trouble running the Zephyr because as weird as this sounds: the fan can have a start up surge that exceeds 200 mA. Its like sizing a water pump for mice.....you still have to look at the locked rotor current and surge current. With the Midnite Classic, it will just shut off the 12 v output if it exceeds 200 mA, and it doesn't seem to have an error message or warning. You could also use a Simple Switch, or other voltage controlled switching device (C40, Tristar, Solar Converters, etc)

R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760

On 1/7/2015 8:45 AM, Chris Daum wrote:
Dear folks:
Has anyone hooked up a battery vent fan, being turned on and off using just a Magnum MS4024PAE inverter? Is there some AUX output that can be used?
Thanks as always for your help!
Chris Daum
Oasis Montana Inc.
406-777-4309
www.oasismontana.com <http://www.oasismontana.com>


_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org


_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to