Hi Jeremy, I think you are talking about two different things here. LBX mode in the SW was for connecting to an AC input which is the same using Connect VDC with the Magnum. I think what you are referring to here is the cut in voltage after a low battery cutout. On all Magnum inverters the VDC cut in voltage is preset at 12.5, 25, and 50 VDC. If the inverter goes to Low Battery it will start inverting again at these voltages.
Gary Gary Baxter Product Manager Magnum | Dimensions 2211 West Casino Rd. Everett, WA. 98204 Office 425.353.8833 | Mobile 425.501.0289 | Fax. 425.353.8390 Please Note My New Email Address: gbax...@sensata.com | www.magnumenergy.com A Sensata Technologies Business Unit -----Original Message----- From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of All Solar, Inc. Sent: Saturday, November 08, 2014 9:36 AM To: re-wrenches@lists.re-wrenches.org Subject: [RE-wrenches] LBX with Magnum? Greetings, I'm trying to set up a magnum inverter to reconnect after a low battery cut out condition at a higher voltage than is presently set. Basically like the old SW inverters LBX mode. Magnum tech-support thought using the advanced remote control can work but I'm not seeing that adjustable setting in any of the menus. I would call it low battery cut in. There is no AC input to this inverter so we want the batteries to recharge with the PV system until it gets to a higher voltage, say 55 V before the inverter turns back on. We also have a midnight charge controller on board but I'm trying to use the inverter features first. Jeremy Rodriguez, President All Solar, Inc. 1463 M Penrose Colorado 81240 719-372-3808 office 719-372-3804 fax www.asolarelectric.com Sent by Jeremy's iPhone. Sorry for typos and shorthand! _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
