Al,
You can backfeed QO Breakers.
Drake
At 05:47 PM 9/16/2014, you wrote:
Wrenchers,
One of my associates was asked by an inspector to prove that the QO
breaker is rated for back-feeding. I seem to remember the code
stating that as long as the breaker does not state that it is only
rated for one direction then it is ok to back feed.
Anyone have a reference to the code or literature from Square D that
states it is ok to back feed?
All feedback is appreciated.
Al Frishman
AeonSolar
<tel:%28917%29%20699-6641>(917) 699-6641 - cell
<tel:%28888%29%20460-2867>(888) 460-2867
<http://www.aeonsolar.com/>www.aeonsolar.com
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
