You could probably use a spray on roof sealer or membrane.
On Sun, Aug 31, 2014 at 9:18 AM, Dan Fink <danbo...@gmail.com> wrote: > Ron; > You might try the Plasti-Dip stuff used to coat tool handles. Would be > expensive for an entire array, but a can should cover one PV module. We saw > a lot of this after the High Park Fire burned through our off-grid area in > 2012. > > Dan Fink > Buckville Energy > IREC Certified Instructor™ for: > ~ PV Installation Professional > ~ Small Wind Installer > 970.672.4342 > > > > > On Sun, Aug 31, 2014 at 5:32 AM, Ron Young <solarea...@solareagle.com> > wrote: > >> Hello Wrenches, >> I have an installation of 165w PV on a pole mount that was exposed to a >> fire from the rear when the customers shop burned. 6 of the 10 panels >> survived with only replacement of the MC4 plugs required but one of the >> panels that is still functioning had the rear coating melted off. The cells >> and electrical grid still function. Can anyone recommend a replacement >> coating that may salvage this panel for a few more years. I know if left >> exposed it will soon deteriorate but am wondering if some kind of commonly >> available non conductive rubberized or latex type of coating might do the >> job? >> >> Ron Young >> _______________________________________________ >> >> >> > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > > -- Chris Mason NABCEP Certified Solar PV Installer™ Solar Design Engineer Generac Generators Industrial technician www.cometsolar.com <http://www.cometenergysystems.com> 264.235.5670 869.662.5670 Skype: netconcepts
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
