Hi William, You might try an insulation piercing connector for this application:
https://www.platt.com/platt-electric-supply/Splicer-Reducers-Insulation-Pi ercing/Ilsco/IPC-4-0-2-0/product.aspx?zpid=708303 Also, not to get nit-picky, but you might be in violation of the 120% rule if that is a load side tap. Just a couple of thoughts. Best, August -----Original Message----- From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of William Miller Sent: Wednesday, June 25, 2014 11:28 AM To: RE-wrenches Subject: [RE-wrenches] Split bolt Friends: For reference below is a phot of the project. William _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
