HI Will, You can do this.
Take a standard breaker panel, install a Arc fault and run the wiring from the enphase like it is the grid: ie into the main lugs. Then this will go out through the breaker in the correct fashion, and onto the main panel. jay peltz power PS as to the code, they want it this way On May 20, 2014, at 7:59 AM, Will White wrote: > Wrenches, > > Is anyone else having problems with inspectors and the 2014 NEC? In Mass > we’re having all kinds of issues with inspectors requiring/allowing an array > of different things for 690.12 rapid shut down ranging from roof top > disconnects, disconnects on the side of a house 20’ up, disconnects in > attics, or only disconnects that can be activated on the ground. It varies > between inspectors. > > We’re also having problems with one inspector requiring arc fault breakers on > Enphase even though there are no UL listed arc fault breakers that can be > back fed or he wants us to run the trunk cable in a raceway. > > It’s getting very difficult to install in Mass. > > Thanks, > Will > > Will White > Operations Manager - New England > RGS Energy > 64 Main St. |Montpelier, VT 05602 > tel 802.223.7804 | mobile 802.234.3167 | fax 802.223.8980 > RGSEnergy.com | william.wh...@rgsenergy.com > > > > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
