Bob-O
I did that once for a client, I used 3 Yingli 75s , they fit well
but the array turned out to be to heavy for the Golf Carts roof frame,
stress cracks started showing up. I think I still have the 36 volt
charge controller, built by Solar Converters, it never got installed, if
you happen to need one its available.
Carl Hansen
Hansen&Sun Elect.
505 470-0770
On 4/11/2014 6:36 PM, Bob-O Schultze wrote:
Esteemed and just steamed Fellows,
I've rebuilt an old dead 36V golf cart and I'd like to put an array on it. The problem is that the
roof area is only 40" x 65ish" and it's 36V. I'm OK with a bit of overhang the 65"
dimension, but not side to side as it will be a head bumper getting in and out. Don't want to put
anything less than 150W up there and more, of course, is mo betta. Got an MPPT controller embedded
in so higher voltage is not an issue. My first thought is to find three old M55s which are only
13" wide, but I'm open to whatever. The beauty of the M55s would be they are UPS-able. So...
anybody got some? Other suggestions? Got lots of trading stock.
Thanks, Bob-O
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
