Don't utter the word tap. :) See: http://www.soligent.net/documents/HappyLandings_v3.pdf
We usually specify a fusible disconnect for overcurrent protection when grouping the PV AC combiner with the main premises disconnect is not practical. Jason Szumlanski Fafco Solar On Wed, Mar 12, 2014 at 1:31 PM, <[email protected]> wrote: > I am trying to determine whether an AC combiner panel (for multiple > inverter outputs) with main breaker can be also used as the PV system > disconnect? > > This is for a line tap situation. I am accustomed to doing these systems > with an AC combiner, and separate enclosure for a breaker style, line tap > over current protection. > > Any thoughts/comments would be appreciated. > > Thanks, > > Kevin > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: [email protected] > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
