All CC's have their problems and MidNite has had their share, but losing
or forgetting their programming has not
been one of them that I'm aware of.
If it is a standard Classic with MNGP display, don't forget to press
ENTER after setting parameters so that
the Classic remembers those settings if the DC goes off and back on again.
I would give Ryan call in tech support. extension 151.
boB
On 2/17/2014 8:06 PM, Jerry Shafer wrote:
Has anyone had an issue with Midnite solar Charge controllers loosing
programming. I have had Out back FM 80 do this and it was an software
issue they fixed it. Now I have the same thing with midnite either
that or the customer is messing with it and this is also a good
possibility but before I go there I want to confirm with you all out
there. The issue from Outback is if the CC is powered down on both
sides it will loose memory, I cant confirm this as the customer is
away and I cant get on site but we have Nickle Iron batteries that
require high charge voltage to charge at all and it seams to not
maintain the charge voltage setting.
Thanks
Jerry
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
