On 02/12/2014 05:52 PM, Larry Crutcher, Starlight Solar Power Systems wrote:
OK, so you need a PC, an internet connection, a router, download and install
software, network PC to router, plug in CC, connect PC to the controller, then
you can change parameters. Got it…..still say hassle.
I can tell you have made up your mind about them. But to work with the
facts:
a) you don't need an internet connection.
b) you don't need a router.
c) you don't need a network PC to router.
You do need:
a) an ethernet cable that you plug into your laptop and into the TS-MPPT-60.
b) the MSView software from their website. One software for their whole
product line. It is natively windows software, however it runs just fine
under Wine on my Linux computers and I suspect the Macintosh has
something similar.
There is no part of the Morningstar product line that requires, or even
uses the Internet.
--
-James Jefferson Jarvis
APRS World, LLC
+1-507-454-2727
www.aprsworld.com
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
