By Snap N Rack, you mean Sun Run... http://cleantechnica.com/2014/02/05/sunrun-acquires-rec-solars-residential-business-aee-solar-snapnrack-means/
I'm curious if these vertical integrators will still make their acquired brands available to small dealers through distribution. When SolarCity snatched up Zep, I had concerns about being able to service or add onto existing Zep systems we installed. That's definitely a concern going forward, and reason to perhaps stick with the most compatible racking solutions available. We used IronRidge for a while, which is largely compatible with Unirac, but now we're back on the Unirac bandwagon. Interesting times... Jason Szumlanski Fafco Solar On Wed, Feb 5, 2014 at 12:45 PM, Max Balchowsky <m...@seesolar.com> wrote: > We have been using Snap N' Rack for a while, Have lots of installs in > Hawaii - so far no problems, I like the convenience of the design for > snapping in the slider nut in mid rail, and also the ability to install the > panels flush with the end of the rails…. > > Max Balchowsky > Design Engineer > SEE Systems > 1048 Irvine Ave Suite 217 > Newport Beach, Ca. 92660 > 760-403-6810 > "Building a Better Future For The Next Generation" > > ------------------------------ > *From:* Allen Frishman <amfr...@aeonsolar.com> > *To:* RE-wrenches <re-wrenches@lists.re-wrenches.org> > *Sent:* Wednesday, February 5, 2014 6:17 AM > *Subject:* Re: [RE-wrenches] SnapNrack > > I am curious about the mid clamps on the snapnrack. The flange that > rests on top of the solar panel frame is so small ~ 3/16". Anyone > experience any problems with these failing in a big storm? With solar > panel frames not being square it is nice to have a little extra to grab - I > am always curious as to why these clips are made with such a small area to > hold the panels down. > > All feedback on these clips is appreciated. > *Al Frishman* > AeonSolar > *(917) 699-6641 - cell* > *(888) 460-2867* > *www.aeonsolar.com <http://www.aeonsolar.com/>* > > On Jun 1, 2013, at 10:41 AM, Max Balchowsky wrote: > > Have installed last three systems (35Kw)with snap n rack. > love it.... > > Max Balchowsky > Design Engineer > SEE Systems > 1048 Irvine Ave Suite 217 > Newport Beach, Ca. 92660 > 760-403-6810 > "Building a Better Future For The Next Generation" > > ------------------------------ > *From:* Solarguy <nt...@1scom.net> > *To:* 'RE-wrenches' <re-wrenches@lists.re-wrenches.org> > *Sent:* Friday, May 31, 2013 10:11 PM > *Subject:* Re: [RE-wrenches] SnapNrack > > The only complaint with the Snapnrack rails is the thin wall can easily be > distorted. This will allow the nut to drop out of its groove. Love the > universal end clamps but have learned to assemble every one to check for > proper fit before getting on the roof. > Jim Duncan > -----Original Message----- > From: re-wrenches-boun...@lists.re-wrenches.org [mailto: > re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Drake > Sent: Friday, May 31, 2013 7:32 PM > To: re-wrenches@lists.re-wrenches.org > Subject: [RE-wrenches] SnapNrack > > Hello Wrenches, > > How would you rate the SnapNrack mounting systems against Unirac and other > mounting systems? > > Thanks, > > Drake > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > > > Preferences > § > 1 > 2 > 3 > 4 > 5 > 6 > 7 > 8 > 9 > 0 > - > = > Backspace > Tab > q > w > e > r > t > y > u > i > o > p > [ > ] > Return > capslock > a > s > d > f > g > h > j > k > l > ; > ' > \ > shift > ` > z > x > c > v > b > n > m > , > . > / > shift > English > Deutsch > Español > Français > Italiano > Polski > Português > Русский > alt > alt > Preferences > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
